Giddings and Lewis 70-H60-UF6 and 70-H60-UF CNC Floor Mills, 1984 w/ 72" Rotab,

Description

Giddings and Lewis 70-H60-UF6 and 70-H60-UF CNC Floor Mills, 1984 w/ 72" Rotab, up to 60 ft. of travel
G&Ls (both units combined) X-Axis: 576 in. Y-Axis: 150 in. Z-Axis: 48 in. W-Axis: 120 in. The above is for both floor mills. X-Axis for one machine is 1/2 the stated X-Axis above. Volatage required 480V Rapid Traverse 180 IPM Contour milling rate 50IPM Milling Spindle 40HP RPM to 1050 RPM 120″ Rotary Table is included. with the G&Ls to make them more usable. Spindle support equipment included. Loading assistance can be provided via overhead crane system on site.
Giddings and Lewis 70-H60-UF6 and 70-H60-UF CNC Floor Mills, 1984 w/ 72" Rotab, up to 60 ft. of travel
G&Ls (both units combined)
X-Axis: 576 in.
Y-Axis: 150 in.
Z-Axis: 48 in.
W-Axis: 120 in.
The above is for both floor mills. X-Axis for one machine is 1/2 the stated X-Axis above.
Volatage required 480V
Rapid Traverse 180 IPM
Contour milling rate 50IPM
Milling Spindle 40HP
RPM to 1050 RPM
120″ Rotary Table is included. with the G&Ls to make them more usable.
Spindle support equipment included.
Loading assistance can be provided via overhead crane system on site.
You might also like
Hurco VMX-60SWi VMC, 2019 - 5 Axis, Probe, Low Hours, Available Immediately
Chiron FZ 12FX 5 Axis VMC, 2015 - 6-Axis Robot and Pallet Stack, Automation, Pro
Kitamura MyCenter 1B VMC, 1986 - Pallet Changer
Motoman K10M (2) Station Cell Robot, 2016 - Flow 7X 50 HP Intensifier Pump
eBay integration
by